ARB LINX

arb-linx-transparent3.jpg
 

What is linx? 

 
 

The next generation of 4×4 accessories

LINX is a unique modern controller that declutters the dashboard and centralises the command of vehicle accessories by replacing classic switches, gauges and monitors with one sleek and smart driver interface. Built on an expandable platform, LINX will continue to evolve your on and off road driving experience both now and into the future.

 

Modules

 
poster-traction@2x.jpg

Front & Rear Traction

Removing up to two (2) swtiches from your dashboard (Front and Rear Air Locker), the Front and Rear Traction Module automatically senses driver input and activates the compressor as required.

Capable of switching each locker independently or allowing the front locker to be activated only when the rear locker is engaged first (a traditional safety feature), each locker key is highlighted in the display’s theme colour when selected, or grey when not selected, also showing a locked/unlocked symbol below the icon.

*Where operating the Air Locker Activation Compressor only, a Linx Relay Wiring Harness will be required (Part No. 180422)

Features:

  • Removing up to two (2) swtiches

  • Instant activation of compressor when required

  • Screen indicators confirm when lockers have been selected

  • Configurable to only run the Front Locker if the Rear Air Locker is engaged

 

Compressor and Pressure Control

 

In addition to being able to activate your compressor within LINX we have taken tyre inflation and deflation to the next level (with the optional pressure control hardware kit fitted), LINX allows tyre pressures to be adjusted and set remotely via the touchscreen. By simply connecting the air hose from your vehicle mounted compressor to the tyre valve, current pressure is displayed on the LINX screen (which you can carry around the vehicle with you). Inputting a target pressure automatically inflates or deflates to your desired level with the pressure shown in real time on the display, making airing up or down for highway or off road simple and accurate.

*Pressure Control requires optional LINX Air Pressure Control Kit (Part No. 7450107)

Features:

  • No additional inflator or deflator gauge required

  • Input desired pressure via Target Pressure keypad

  • Pressure shown in real time when compressor and hose connected

  • Air flow shuts off automatically when target pressure reached

  • On/off activation of compressor

  • Can be viewed in either split or full screen mode

  • User selectable maximum pressure for safety

 
poster-preasure-control@2x.jpg
 

Accessory Switchboard

 
poster-accessory-switch@2x.jpg

A key feature of the LINX platform is its ability to control six (6) additional switched accessories. Each accessory can be customised to switch on or off by user input, and/or automatically by ignition, high beam headlamps, low beam headlamps or reversing lamps. Additionally, each accessory can be personalised in name with individual settings for low voltage cut out to protect your vehicle from a flat battery.

Features:

  • Control up to six (6) additional switched accessories

  • Can be switched on/off manually or automatically by ignition, high beam headlamps, low beam headlamps or reverse lamps

  • Each accessory can have a user selectable low voltage cutout

  • Can be viewed in either split of full screen

 
 

Battery monitor

 

With all the additional powered accessories fitted to your 4WD, having ample battery capacity is a must. LINX allows you to monitor up to three (3) batteries simultaneously. Each battery can be identified by a custom name with the added ability to set low voltage alarms on each; ensuring your beer stays cold and you are never left without enough power to start your vehicle.

Features:

  • Monitors up to three (3) batteries

  • Personalise each battery by name

  • Set independent low volume alarms

  • Can be viewed in either split or full screen mode

poster-battery@2x.jpg
 

Speedometer

 

Your vehicle’s factory speedometer can be inaccurate and changing your tyre size for optimal ground clearance or running different tyres for on or off road use can often lead to further speedometer inaccuracies. With LINX’s Speedometer Module you can now have confidence no matter what size tyre your vehicle runs as the built-in GPS ensures an accurate reading. The LINX Speedometer Module also shows your altitude and compass bearing and allows for speed limit warnings to be set.

Features:

  • Accurate GPS Speed reading

  • Set speed alarm warning , in single increments

  • Shows current altitude

  • Chows compass bearing

  • Colour match text scheme to your vehicle colour scheme

  • Can be viewed in either split or full screen mode

 



Air Suspension Control

 

When fitted with an optional LINX Pressure Control Kit, LINX can control up to 4 airbags either as pairs (to level front to rear) or independently*, allowing for levelling of the vehicle side to side and front to rear. Users can pre-set up to four personalised pressure modes which can be appropriately named to suit common loads or trailer types so they are available at the push of a single button. Many 4WDrivers install air bag suspension systems to help carry the occasional loads associated with towing boats, camper trailers and caravans.

* Requires optional LINX Air Bag Isolation Kit (Part No. 7450109)

Features:

  • Display and control up to four (4) independent air bags

  • Link air bags as pairs to run at the same pressure

  • Up to four (4) custom Pre-set modes

  • Personalise Pre-set mode names e.g. Boat, Caravan, Daily Drive

  • User adjustable Min. and Max. pressure levels per axle

  • Set preferred deflate pressure when ACC. is off

 
 

Inclinometer

 

Using sensor data from the onboard controller, the Inclinometer module displays the roll and pitch of the vehicle, independent of the positioning of the Display. Users can set a pitch and roll warning limit to suit their vehicle so an alarm triggers to warn when the set limit is approaching.

Features:

  • Can be viewed as split screen or separately

  • Audible alarm option

  • When the vehicle reaches the set angle, an alarm is triggered

 

Fridge monitor

 

The Fridge Monitor Module offers users a range of features dependent on the ARB Fridge Freezer it is connected to.

For Elements and Classic Series I Fridges (2014 - March 2019 models), the module can display the fridge's current temperature, power input voltage and compressor status. When connected to a Classic Series II Fridge Freezer, additional enhanced features include the ability to turn the fridge on/off, temperature control, preset temperatures and power while also providing feedback on the fridge lid position (open or closed). The display unit (Celsius or Fahrenheit), battery protection (high, medium or low) and fridge display brightness (high or low) can all also be altered in the module's settings.

Features:

  • Ability to assign fridge name

  • Pre-set temperatures (can assign personalised titles such as 'beer', 'food' and 'ice-cream')

  • Adjust fridge settings including: display unit, battery protection and display brightness

  • Displays the set temperature, power input voltage (12V), fridge compressor status and a lid open warning

 
poster-fridge-monitor@2x.jpg
 

Clock

 

Featuring a range of time-related functions, the Clock module not only shows the time of day in 12 or 24 hour format, it can also be used as a countdown timer, alarm and stopwatch and can even display the world time.

Features:

  • Stopwatch

  • World time

  • Time & Date

  • Countdown Tiemr

  • Alarm

 

gENERAL sETTINGS

 

Beyond its expansive range of modules, LINX presents a truly adaptable platform with module level settings as well as many additional general settings.

Within the general settings of LINX users can customise the colour theme to match any interior dash theme; apply night mode for automated dimming which is activated by the vehicle’s headlights; and set the preferred unit measurements for air pressure, speed and temperature. As an expandable platform, simply connecting the screen to a WiFi point allows you to upgrade your LINX with any new updates at the press of a button.

Features:

  • Set the colour theme to match your vehicle’s dash

  • apply night mode which engages when your headlights are activated

  • Ability to set units to display in imperial or metric

  • Software upgradeable via WiFi Connection

 

 
 

arb linx enquiry form